Lantronix S3220 Series User Guide Rev J PDF 34.75 MB - Page 517

Transition Networks ION x222x / x32xx User Guide Third Party Tool Messages This section discusses messages generated by HyperTerminal, Ping, and Telnet during ION system installation, operation and configuration. HyperTerminal Messages Message: Windows has reported a TAPI error. Use the Phone and Modem Options icon in the Control Panel to ensure a modem is installed. Then restart HyperTerminal. Response: 1. Verify your computer's Ports (COM & LPT) setting. See "Configuring HyperTerminal" on page 53. 2. Use the Computer Management > Device Manager > Troubleshooter button located on the General tab in Properties. 3. Unplug and re‐plug the USB connector on the IONMM card. 4. If the problem persists, contact Technical Support. See Contact Us below. Message: Unable to open COM x. Please check your port settings. Response: 1. Verify your computer's Ports (COM & LPT) setting. See "Configuring HyperTerminal" on page 53. 2. Use the Computer Management > Device Manager > Troubleshooter button located on the General tab in Properties. 3. Unplug and re‐plug the USB connector on the IONMM card. 4. If the problem persists, contact Technical Support. See Contact Us below. Problem: HT Overtyping Problem ‐ You tried to edit a typo in a CLI command, the new data is stored, but the old data is appended to it. Meaning: HyperTerminal (HT) is a terminal emulation program developed by Hillgraeve, Inc., for Microsoft and supplied with some Windows OSes. In HyperTerminal, use the Enter key to drop to a new line, if required, and use the keyboard's Backspace key or the directional arrows to navigate 33472 Rev. J https://www.transition.com Page 517 of 700