Lantronix S3220 Series User Guide Rev J PDF 34.75 MB - Page 356

Transition Networks ION x222x / x32xx User Guide D. Upgrade the IONMM / NID Firmware Perform this procedure to upgrade the IONMM / NID Firmware from either  the IONMM MAIN tab (step D1) or  the UPGRADE tab (step D2). D1. Upgrade IONMM / NID Firmware from the MAIN Tab. 1. Access the IONMM card through the Web interface (see "Starting the Web Interface" on page 45). 2. Select the MAIN tab. 3. Locate the TFTP Settings section at the bottom of the screen. 4. Enter the TFTP Server Address. This is the IP address of the TFTP Server from step C ("Run TFTP Server") above. 5. Enter the Firmware File Name. This is the name of the firmware file from step C sub‐step 2 above. 6. Click the Upgrade Firmware button. The message "The specified firmware on the TFTP Server will be upgraded to the current module; are you sure to proceed?" displays. 7. Click OK. The file is downloaded and the x222x / x32xx and/or IONMM reboots. When the reboot is complete, the message "[xx]IONMM rebooting finished" displays. 8. Click the Refresh button. The Software Revision area is updated from the old version number to the new version number (e.g., from 1.0.1 to 1.0.3). 9. If you will be using the same TFTP Server Address for future upgrades, click the Save Server Address button. 33472 Rev. J https://www.transition.com Page 356 of 700