Lantronix S3220 Series User Guide Rev J PDF 34.75 MB - Page 616

Transition Networks ION x222x / x32xx User Guide Appendix G: Remote Manage Power Supply (RMPS) Feature This feature is provided with ION C3220‐1040 firmware version 1.3.17 or above and IONMM firmware version1.3.20 or above. ION Power supply support includes IONPS‐D, IONPS‐A, IONPS‐D‐R1 and IONPS‐ A‐R1. ION Chassis support includes the ION 6‐slot chassis (ION106) or the ION 19‐slot chassis (ION219) de‐ ployed as the remote chassis. The RMPS feature lets you view and manage ION power supplies in a remote unmanaged chassis, in‐ band, over the fiber, using a pair of C3220‐1040 converters. This feature improves visibility of equip‐ ment installed in areas with limited accessibility such as a service provider's customer site. From the C3220 management interface in the local managed chassis through its port 2 (the fiber port) you can view the remote C3220 as well as Remote PS 1 and Remote PS 2.. You can actively manage con‐ verter cards and power supply modules in both the local managed chassis and the remote unmanaged chassis. On the local ION Chassis, the IONDCR‐R1 in the IONPS‐D power supply is connected to the existing local alarm system, which alerts you to power supply issues. You can log in to the IONMM and check the status of power supply modules and also check the status of all the cards in the chassis. In the IONMM Web UI, looking at the local C3220 (in slot 1) shows the link to the remote C3220 (also in slot 1) and both power supplies in the remote chassis. Since there are no alarms at the remote chassis power supply modules, you must log into the local IONMM to check the status of remote power supplies. Traps from the remote power supply modules are accessible via the local IONMM. 33472 Rev. J https://www.transition.com Page 616 of 700