Lantronix S3220 Series User Guide Rev J PDF 34.75 MB - Page 423

Transition Networks ION x222x / x32xx User Guide Cannot remove vlan on this card! You entered a command to delete one or all VLANs from the NID, but the action cannot be performed. For example: C1|S7|L1D>remove vlan all Cannot remove vlan on this card! C1|S7|L1D>remove vlan vid=3 Cannot remove vlan on this card! C1|S7|L1D> 1. Make sure this is the function that you want. 2. Use the go command to switch to a NID that supports the VLAN database. 3. Use the add vlan-db command to add a VLAN VID if needed. 4. If the problem persists, contact Technical Support. See Contact Us below. Cannot remove forward database rows on this card! You entered a command to delete a VLAN forward database VID (forward database row) from the NID, but the action cannot be performed. For example: C1|S7|L1D>remove vlan-db vid 3 Cannot remove forward database rows on this card! C1|S7|L1D> 1. Make sure this is the function that you want. 2. Use the go command to switch to a NID that supports the VLAN FDB. 3. If the problem persists, contact Technical Support. See Contact Us below. Error symbol period window low is out of range, its range is 125000000 - 268435455! Error frame period window is out of range, its range is 174762 - 104857560! Error frame period threshold is out of range, its range is 0 - 268435455! Error frame window is out of range, its range is 10 - 600! Error frame threshold is out of range, its range is 0 - 268435455! Error frame seconds summary window is out of range, its range is 100 - 9000! Error frame seconds summary threshold is out of range, its range is 0 - 268435455! A parameter entered in the "Event Configuration" has exceeded the range limitation. 1. Enter a parameter within the valid range displayed. See "LOAM Event Configuration Default Values and Valid Ranges" on page 130. 2. If the problem persists, contact Technical Support. See Contact Us below. No data in VLAN forward database table now! You entered the command to display FWDDB information, but the VLAN forward database table has no data to report. For example: C1|S16|L1D>show fwddb config fdbid 1 No data in VLAN forward database table now! 1. Make sure this is the function that you want. 2. Use the Forwarding Database Commands on page 92 to create the VLAN FDB entry. 3. If the problem persists, contact Technical Support. See Contact Us below. 33472 Rev. J https://www.transition.com Page 423 of 700