Lantronix S3220 Series User Guide Rev J PDF 34.75 MB - Page 380

Transition Networks ION x222x / x32xx User Guide Cannot access the NID via the Web 1. Can you access the IONMM? Yes No Continue with Step 2. See "Cannot access the IONMM via the Web" on page 172. 2. Power cycle the NID. 3. If the NID is a remote, power cycle the local NID. 4. If the problem persists, contact Technical Support. See Contact Us below. Cannot activate IP-based management 1. Verify that the IP, gateway, and subnet mask are configured correctly. 2. With DHCP enabled, DHCP could have failed leaving the system with the old static IP configuration. Check the configuration via the USB port. a) Access the IONMM through a USB connection (see "Starting a USB Session" on page 41). b) At the command prompt, type: show ip-mgmt config. c) Press Enter. 3. If the problem persists, contact Technical Support. See Contact Us below. Cannot upgrade modules See Upgrade fails on page 177. Cannot upload upgrade files See Upload fails on page 177. 33472 Rev. J https://www.transition.com Page 380 of 700