Lantronix S3220 Series User Guide Rev J PDF 34.75 MB - Page 545

Transition Networks ION x222x / x32xx User Guide HTTPS Configuration 1. Enable HTTPS. set https state=enable 2. Define the certificate type. set https certificate-type={authorized | self‐certificate} 3. Define the certificate file. set https certificate-file= 4. Define the private key file. set https private-key file= 5. Define the password. set https private-key password= Management VLAN Configuration 1. Access the x222x/x32xx via either a USB connection or a Telnet session. 2. Check the current Management VLAN configuration. Type show mgmt vlan config and press Enter. Note: In the following steps to enable Management VLAN, the first is at the port level, the other steps are at the device level. These steps must be performed in the order shown. 3. Change the Management port from the default "Customer" mode to "Network" mode. Type set port vlan tag mode=network and press Enter. 4. Set this port as Management port; enter the ports to be associated with this VLAN ID (VID). Type set mgmt vlan port=2 and press Enter. 5. Enable Management VLAN mode. Type set mgmt vlan state=enable and press Enter. 6. Change the Management VID. Type set mgmt vlan vid=10 and press Enter. 7. Add a VLAN. Type add vlan vid=10 and press Enter. 8. Other Management VLAN or Port VLAN attributes can be changed without strict order. See "Configuring Management VLAN" on page 272. 33472 Rev. J https://www.transition.com Page 545 of 700