Lantronix S3220 Series User Guide Rev J PDF 34.75 MB - Page 464

Transition Networks ION x222x / x32xx User Guide Message: set ip type=ipv4 addr=192.168.0.10 subnet-mask=255.255.255.0 failed Response: 1. Check if this is a recurring problem. 2. Verify the operation in the related section of this manual. Retry the operation. 3. See the related command in the ION System CLI Reference Manual, 33473. 4. If the problem persists, contact Technical Support. See Contact Us below. Message: set gateway type=ipv4 addr=192.168.0.1 failed Response: 1. Check if this is a recurring problem. 2. Verify the operation in the related section of this manual. Retry the operation. 3. See the related command in the ION System CLI Reference Manual, 33473. 4. If the problem persists, contact Technical Support. See Contact Us below. Message: set dns-svr svr=1 type=dns addr=0.0.0.0 failed Response: 1. Check if this is a recurring problem. 2. Verify the DNS Server operation in the related section of this manual. Retry the operation. 3. See the related DNS server command in the ION System CLI Reference Manual, 33473. 4. If the problem persists, contact Technical Support. See Contact Us below. Message: set snmp traphost svr=1 type=dns addr=0.0.0.0 failed Response: 1. Check if this is a recurring problem. 2. Verify the SNMP operation in the related section of this manual. Retry the SNMP operation. 3. See the related SNMP command in the ION System CLI Reference Manual, 33473. 4. If the problem persists, contact Technical Support. See Contact Us below. Message: set sntp state=disable failed Response: 1. Check if this is a recurring problem. 2. Verify the SNTP operation in the related section of this manual. Retry the SNMP operation. 3. See the related SNTP command in the ION System CLI Reference Manual, 33473. 4. If the problem persists, contact Technical Support. See Contact Us below. Message: set sntp dst-state=disable failed Response: 1. Check if this is a recurring problem. 2. Verify the SNTP operation in the related section of this manual. Retry the SNMP operation. 3. See the related SNTP command in the ION System CLI Reference Manual, 33473. 4. If the problem persists, contact Technical Support. See Contact Us below. Message: set sntp timezone=8 failed Response: 1. Check if this is a recurring problem. 2. Verify the SNTP operation in the related section of this manual. Retry the SNMP operation. 3. See the related SNTP command in the ION System CLI Reference Manual, 33473. 4. If the problem persists, contact Technical Support. See Contact Us below. Message: set sntp dst-start="1969 1231 18:00:00" failed Response: 1. Check if this is a recurring problem. 2. Verify the SNTP operation in the related section of this manual. Retry the SNMP operation. 3. See the related SNTP command in the ION System CLI Reference Manual, 33473. 4. If the problem persists, contact Technical Support. See Contact Us below. 33472 Rev. J https://www.transition.com Page 464 of 700