HP Jet Fusion 300 User Guide - Page 38
The best orientation for embossing and debossing letters is to place them upside down in the build chamber.
View all HP Jet Fusion 300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
The minimum printable features in planes X, Y, and Z are as follows: Table 6-1 Minumum printable Specifications Descriptions Minimum hole diameter at 1 mm thickness 0.5 mm (0.02 in) Minimum shaft diameter at 10 mm height Minimum printable font size for embossed or debossed letters or numbers Minimum clearance at 1 mm thickness 0.5 mm (0.02 in) 6 pt (2.1 mm) (0.083 in) 0.5 mm (0.02 in) Minimum slit between walls 0.5 mm (0.02 in) ● Engraving. Multi Jet Fusion technology allows you to print letters and drawings with a very high resolution and definition. For the best possible output, any text, number, or drawing included in a part should have at least 1 mm of depth or height. The best orientation for embossing and debossing letters is to place them upside down in the build chamber. 32 Chapter 6 Design and printing guidelines