Ricoh P C301W Users Guide - Page 80
Print Cartridge, Fusing Unit, Transfer Roller, Int. Transfer Unit, Black, Magenta, Cyan, Yellow
View all Ricoh P C301W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
4. Configuring the Machine Using the Control Panel • On The same printer driver you have installed in your computer can be used with any machine other than the one originally used for installation, if the machine is of the same model. • Export to NFC Specifies whether or not to synchronize the data you have configured using the control panel and Web Image Monitor with the data stored in NFC. You can read and write the data in NFC by using the application corresponding to the machine. Default: [On] • Off Does not synchronize the data you have configured using the control panel and Web Image Monitor with the data stored in NFC. • On Synchronizes the data you have configured using the control panel and Web Image Monitor with the data stored in NFC. Auto Continue Sets the printer to ignore an error with paper size or type and continue printing. The printing stops temporarily when an error is detected, and restarts automatically after about ten seconds using the settings made on the control panel. However, if the size of paper specified on the control panel and that of the paper loaded in the paper tray or the paper size specified for the print job do not match when printing restarts, it may cause a paper jam. Default: [Off] • Off • On Supplies Status Displays information about consumables. • Toner Black, Magenta, Cyan, Yellow • Other Supplies Print Cartridge, Fusing Unit, Transfer Roller, Int. Transfer Unit Toner Near End Specifies the low toner level notification timing. • Sooner Low toner level notification will be made when the number of pages that can be printed with the remaining toner is approximately 300. 78