Ricoh P C301W Users Guide - Page 185
Using the WPS Button, key to select [Enable Wireless Wi-Fi], and then press the [OK] key.
View all Ricoh P C301W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 185 highlights
Connecting the Machine to a Wireless Network 21. Press the [OK] key. After connecting to the network, the Wi-Fi screen is displayed. 22. Press the [ ] or [ ] key to select [Wi-Fi Status], and then press the [OK] key. When "Connected" is displayed, the connection has been established. • When "Connecting" is displayed, the connection is being established. • When "Disconnected" is displayed, the connection has not been established. Start again from the beginning. Using the WPS Button A router (access point) is needed to set up a connection. Make sure the Ethernet cable is not connected to the machine. 1. Check that the router (access point) is working correctly. 2. Press the [Menu] key. ECB202 3. Press the [ ] or [ ] key to select [Network Settings], and then press the [OK] key. 4. Enter the administrator password if required. 5. Press the [ ] or [ ] key to select [Wireless (Wi-Fi)], and then press the [OK] key. 6. Press the [ ] or [ ] key to select [Enable Wireless (Wi-Fi)], and then press the [OK] key. 7. Press the [ ] or [ ] key to select [Enable], and then press the [OK] key. 8. Press the [Menu] key to return to the Initial screen. 9. Turn off the machine, and then turn it back on. 10. Press the [Menu] key. 11. Press the [ ] or [ ] key to select [Network Settings], and then press the [OK] key. 12. Enter the administrator password if required. 13. Press the [ ] or [ ] key to select [Wireless (Wi-Fi)], and then press the [OK] key. 14. Press the [ ] or [ ] key to select [WPS], and then press the [OK] key. 183