Ricoh P C301W Users Guide - Page 194
Enabling and Disabling IPsec Using the Control Panel, Click [IP Security Policies on Local Computer].
View all Ricoh P C301W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 194 highlights
9. Appendix 36. Click [Finish]. If you are using IPv6, you must repeat this procedure from Step 12 and specify ICMPv6 as an exception. When you reach Step 22, select [58] as the protocol number for the "Other" target protocol type, and then set [Negotiate security] to [Permit]. 37. Select the filter action that you have just created, and then click [Next]. 38. Select one of options for an authentication method, and then click [Next]. 39. Click [Finish], and then click [OK] twice. The new IP security policy (IPsec settings) is specified. 40. Click [IP Security Policies on Local Computer]. 41. Select the security policy that you have just created, right click on it, and then click [Assign]. IPsec settings on the computer are enabled. • To disable the computer's IPsec settings, select the security policy, right click, and then click [Unassign]. Enabling and Disabling IPsec Using the Control Panel • This function is available only when an administrator password is specified. 1. Press the [Menu] key. 2. Press the [ ] or [ ] key to select [Admin. Tools], and then press the [OK] key. 3. Enter the administrator password if required. 4. Press the [ ] or [ ] key to select [IPsec], and then press the [OK] key. 5. Press the [ ] or [ ] key to select [Active] or [Inactive] and then press the [OK] key. 6. Press the [Menu] key to return to the initial screen. 192