Lantronix EDS2100 EDS1100 / EDS2100 - User Guide - Page 67
Network Terminal Configuration, Terminal on Network Configuration, Terminal Type
View all Lantronix EDS2100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
9: Terminal and Host Settings Network Terminal Configuration To configure menu features applicable to CLI access via the network: 1. Click Terminal > Network at the top of the page. Configuration is automatically selected. The Terminal on Network Configuration page appears. Figure 9-3 Terminal on Network Configuration 2. Enter or modify the following settings: Table 9-4 Terminal on Network Configuration Terminal on Network Configuration Settings Terminal Type Login Connect Menu Exit Connect Menu Echo Description Enter text to describe the type of terminal. The text will be sent to a host via IAC. Note: IAC means, "interpret as command." It is a way to send commands over the network such as send break or start echoing. Select the interface to display when the user logs in. Choices are: Enabled = shows the Login Connect Menu. Disabled = shows the CLI Select whether to display a choice for the user to exit the Login Connect Menu and reach the CLI. Choices are: Enabled = a choice allows the user to exit to the CLI. Disabled = there is no exit to the CLI. Applies only to Connect Mode Telnet connections, not to Accept Mode. Only disable Echo if your terminal echoes, in which case you will see double of each character typed. 3. Click Submit to save changes. EDS1100/2100 User Guide 67