Lantronix EDS2100 EDS1100 / EDS2100 - User Guide - Page 127
CLI Configuration, Submit
View all Lantronix EDS2100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 127 highlights
Figure 14-5 CLI Configuration 14: Advanced Settings 2. Enter or modify the following settings: Command Line Interface Configuration Settings Login Password Enable Level Password Quit Connect Line Inactivity Timeout Telnet State Telnet Port Telnet Max Sessions SSH State SSH Port SSH Max Sessions 3. Click Submit. Table 14-6 CLI Configuration Description Enter the password for Telnet access. Enter the password for access to the Command Mode Enable level. There is no password by default. Enter a string to terminate a connect line session and resume the CLI. Type before any key the user must press when holding down the Ctrl key. An example of such a string is L. Set an Inactivity Timeout value so the CLI session will disconnect if no data is received after the designated time period. Default is 15 minutes. Enter a value of 0 to disable. Select Disabled to disable Telnet access. Telnet is enabled by default. Enter the Telnet port to use for Telnet access. The default is 23. Maximum number of simultaneous Telnet sessions. Select Disabled to disable SSH access. SSH is enabled by default. Enter the SSH port to use for SSH access. The default is 22. Maximum number of simultaneous SSH sessions. EDS1100/2100 User Guide 127