Lantronix EDS2100 EDS1100 / EDS2100 - User Guide - Page 42
: Line and Tunnel Settings, Line Settings, Line Statistics
View all Lantronix EDS2100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
8: Line and Tunnel Settings This chapter describes how to view and configure lines and tunnels. It contains the following sections: Line Settings Tunnel Settings Line Settings Note: The number of lines and tunnels available for viewing and configuration differ between Lantronix DeviceLinx products. The screenshots in this manual represent one line and tunnel, as available, for example, on an XPort Pro and EDS1100. However, other device networking products (such as EDS2100, EDS4100, XPort AR, and EDS8/16/32PR) support additional lines and tunnels. You can view statistics and configure the serial interfaces (referred to as lines) by using the Line web page. When you click Line from the Main Menu, Line 1 fields display. The following sub-menus can be used: Line Statistics-Displays statistics for the serial lines. For example, the bytes received and transmitted, breaks, flow control, parity errors, etc. Line Configuration-Enables the change of the name, interface, protocol, baud rates, and parity, etc. Line Command Mode-Enables the types of modes, wait time, serial strings, signon message, etc. The following sections describe the steps to view and configure Line 1 settings. These instructions also apply to additional line menu options. Figure 8-1 Line 1 Statistics Line Statistics This read-only web page shows the status and statistics for the serial line selected at the top of this page. 1. Select Line on the menu bar. The Line Statistics page appears. EDS1100/2100 User Guide 42