Lantronix EDS2100 EDS1100 / EDS2100 - User Guide - Page 43
Line Configuration, To con Line 1, Line 1
View all Lantronix EDS2100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
8: Line and Tunnel Settings Line Configuration This page shows the configuration settings for the serial line selected at the top of the page and lets you change the settings for that serial line. To configure Line 1: 1. Click Line 1 > Configuration at the top of the page. The Line 1 Configuration page appears. Table 8-2 Line 1 Configuration 2. Enter or modify the following settings: Line - Configuration Settings Name Interface State Protocol Baud Rate Table 8-3 Line 1 Configuration Description If the Terminal Login Menu feature is being used, enter the name for the line. Leaving this field blank will disable this line from appearing in the Terminal Login Menu. The default Name is blank. See Terminal and Host Settings on page 65 for related configuration information. Select the interface type from the drop-down menu. The default is RS232. Indicates whether the current line is enabled. To change the status, select Enabled or Disabled from the drop-down menu. Select the protocol from the drop-down menu. The default is Tunnel. Select the baud rate from the drop-down menu. The default is 9600. EDS1100/2100 User Guide 43