Lantronix EDS2100 EDS1100 / EDS2100 - User Guide - Page 30

EDS2100 Connections, the self-test begins, and Evolution OS™ starts.

Get Lantronix EDS2100 PDF manuals and user guides View all Lantronix EDS2100 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 30 highlights

4: Installation of EDS2100  The null modem cable is the best cable to connect the serial port to another DTE device. The straight-though (modem) cable is the best cable to connect the serial port to a DCE device.  Power-up the device by using the Barrel-power connector only. The barrel-power connector supports a power range of 9 to 30 VDC. Note: As soon as you plug the device into power, the device powers up automatically, the self-test begins, and Evolution OS™ starts. Perform the following steps to install your device which are numbered in Figure 4-8 also. 1. Connect a serial device to your unit. 2. Connect an Ethernet cable between the EDS2100 RJ45 port and your Ethernet network. 3. Plug the EDS2100 into the power outlet by using the power supply that was included in the packaging. The required input voltage is 9-30 VDC (center +) with1.5W maximum power required. 4. Power up the serial devices. Figure 4-8 EDS2100 Connections EDS1100/2100 User Guide 30

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
4: Installation of EDS2100
EDS1100/2100 User Guide
30
The null modem cable is the best cable to connect the serial port to another DTE device. The
straight-though (modem) cable is the best cable to connect the serial port to a DCE device.
Power-up the device by using the Barrel-power connector only. The barrel-power connector
supports a power range of 9 to 30 VDC.
Note:
As soon as you plug the device into power, the device powers up automatically,
the self-test begins, and Evolution OS™ starts.
Perform the following steps to install your device which are numbered in
Figure 4-8
also.
1.
Connect a serial device to your unit.
2.
Connect an Ethernet cable between the EDS2100 RJ45 port and your Ethernet network.
3.
Plug the EDS2100 into the power outlet by using the power supply that was included in the
packaging. The required input voltage is 9-30 VDC (center +) with1.5W maximum power
required.
4.
Power up the serial devices.
Figure 4-8
EDS2100 Connections