Lantronix EDS2100 EDS1100 / EDS2100 - User Guide - Page 109
IP Address Filter, To con the IP address filter, IP Address Filter Settings, Remove
View all Lantronix EDS2100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
13: Maintenance and Diagnostics Settings IP Address Filter The IP address filter specifies the hosts and subnets permitted to communicate with the EDS1100/2100. Note: If using DHCP/BOOTP, ensure the DHCP/BOOTP server is in this list. To configure the IP address filter: 1. Click IP Address Filter on the menu bar. The IP Address Filter page opens to display the current configuration. Figure 13-14 IP Address Filter Configuration Note: Be aware not to assign your network IP address as "filtered." Doing so will prevent you from accessing the EDS1100/2100. You will have to then access the EDS1100/2100 from a different computer to reset the configuration. 2. Enter or modify the following settings: IP Address Filter Settings IP Address Network Mask 3. Click Add. Table 13-15 IP Address Filter Settings Description Enter the IP address to add to the IP filter table. Enter the IP address' network mask in dotted notation. Note: In the Current State table, click Remove to delete any existing settings, as necessary. EDS1100/2100 User Guide 109