Lantronix EDS2100 EDS1100 / EDS2100 - User Guide - Page 41
Network 1 Ethernet Link, Settings, Description
View all Lantronix EDS2100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
7: Network Settings Network 1 Ethernet Link This page shows the current negotiated Ethernet settings and lets you change the speed and duplex settings. To view and configure the Ethernet link: 1. Click Network on the menu bar and then click Network 1 > Link at the top of the page. The Network 1 (eth0) Ethernet Link page appears. If coming from another Network page, click Network 1 > Link at the top of the page. Figure 7-4 Network 1 Ethernet Link The Status table shows the current negotiated settings. The Configuration table shows the current range of allowed settings. 2. Enter or modify the following settings: Table 7-5 Network 1 Ethernet Link Network 1-Ethernet Link Settings Speed Duplex Description Select the Ethernet link speed. Default is Auto. Select the Ethernet link duplex mode. Default is Auto. 3. Click Submit. The changes take effect immediately. Note: The following section describes the steps to view and configure Line 1 settings; these steps apply to other line instances of the device. EDS1100/2100 User Guide 41