Lantronix EDS2100 EDS1100 / EDS2100 - User Guide - Page 39
Network 1 (eth0) Interface Configuration, BOOTP Client
View all Lantronix EDS2100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
7: Network Settings Network 1 (eth0) Interface Configuration This page shows the configuration settings for the Ethernet connection and lets you change these settings. To view and configure network interface settings: 1. Click Network 1 > Interface > Configuration at the top of the page. The Network 1 (eth0) Interface Configuration page appears. Figure 7-2 Network 1 (eth0) Interface Configuration 2. Enter or modify the following settings: Network 1 Interface Configuration Settings BOOTP Client Table 7-3 Network 1 (eth0) Interface Configuration Description Select On or Off. At boot up, the device will attempt to obtain an IP address from a BOOTP server. Notes: Overrides the configured IP address, network mask, gateway, hostname, and domain. When DHCP is On, the system automatically uses DHCP, regardless of whether BOOTP Client is On. EDS1100/2100 User Guide 39