Lantronix EDS2100 EDS1100 / EDS2100 - User Guide - Page 108
SMTP Settings, Submit, Remove All, Remove, To con the SMTP network protocol, Protocol Stack
View all Lantronix EDS2100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
13: Maintenance and Diagnostics Settings Table 13-11 ARP Settings Protocol Stack Description ARP Settings (continued) MAC Address Enter the MAC address to add to the ARP cache. Note: Both the IP and MAC addresses are required for the ARP cache. 4. Click Submit for ARP or Add after supplying both address fields for ARP cache. 5. Remove entries from the ARP cache, as desired: Click Remove All to remove all entries in the ARP cache. OR Click Remove beside a specific entry to remove it from the ARP cache. SMTP Settings SMTP is configuration for a basic SMTP proxy. An SMTP proxy in this sense is a simple forwarding agent. Note: Lantronix does not support SMTP AUTH or any other authentication or encryption schemes for email. To configure the SMTP network protocol: 1. Click Protocol Stack on the menu bar. 2. Click SMTP. Figure 13-12 SMTP 3. Modify the following settings: Table 13-13 SMTP Settings Protocol Stack SMTP Settings Relay Address Remote Port Description Address of all outbound email messages through a mail server. Can contain either a hostname or an IP address. Port utilized for the delivery of outbound email messages. 4. Click Submit. EDS1100/2100 User Guide 108