Kyocera TASKalfa Pro 15000c Pro 15000c Command Center RX User Guide - Page 74
Snmp
View all Kyocera TASKalfa Pro 15000c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Management Settings SNMP Number of Records Set the number of Secure Communication Error Log Histories for sending, from 1 to 1000. View History A Secure Communication Error Log History List will be shown when clicking View button. Run once now A Secure Communication Error Log History will be sent to a recipient once automatically when clicking Send button. 6. Click Submit button. This section includes advanced settings for SNMP. If the settings for the item marked with an asterisk (*) has been changed, you must restart the machine or the network. To restart the machine, proceed to the Reset page. SNMP Settings 1. Click SNMP under Management Settings on the navigation menu. The SNMP Settings page opens. 2. Configure SNMPv1/v2c as follows. SNMPv1/v2c Activate or deactivate the SNMPv1/v2c protocol. Select either On or Off in the Protocol Settings page under Network Settings. To configure SNMP v1/v2, proceed as follows. Read Community Enter the community name for SNMP requests to read a value. The default name is 'public'. After you have changed the setting, you must restart the machine. Write Community Enter the community name for SNMP requests to write (change) a value. The default name is 'public'. After you have changed the setting, you must restart the machine. sysContact The MIB-II sysContact object. Usually this is the E-mail address of the network administrator. sysName The MIB-II sysName object. Usually this is the host or domain name of the machine. 70 Embedded Web Server