Kyocera TASKalfa Pro 15000c Pro 15000c Command Center RX User Guide - Page 56

Protocol, Network Security Settings

Get Kyocera TASKalfa Pro 15000c PDF manuals and user guides View all Kyocera TASKalfa Pro 15000c manuals
Add to My Manuals
Save this manual to your list of manuals

Page 56 highlights

Network Settings Protocol This section includes advanced settings for various protocols used as the communication procedures and communication protocols. *: If the settings for the item marked with an asterisk (*) has been changed, you must restart the machine or the network. To restart the machine, proceed to the Reset page. 1. Click Protocol under Network Settings on the navigation menu. The Protocol Settings page opens. 2. This section includes the following items for configuration. Print Protocols Configure the protocols used for printing. This section includes the following items for configuration: 1. NetBEUI: The NetBEUI protocol allows Peer-to-peer printing (SMB Print). With this protocol enabled, the machine is created in Windows Network Neighborhood. NetBEUI is an enhanced version of the NetBIOS protocol, which is used for transport of SMB protocol. Enables or disables the NetBEUI protocol. If NetBEUI is turned On, the name resolution by NetBIOS (NMB) becomes available. Workgroup: Workgroup represents the workgroup which will appear in Entire Network in "Windows Network Neighborhood." Comment: You can enter comments here. (This can be left blank.) 2. LPD: To enables the LDAP protocol, turn this item On. 3. FTP Server (Reception): FTP is a communications protocol for transmitting files over a Network. To enables the FTP protocol, turn this item On. 4. IPP: IPP is a protocol which performs transmission and reception of printing data and configuration of machines through TCP/IP networks including the Internet. To enables the IPP protocol, turn this item On. Port Number: Enter the port number. Typically, this should be 631.(e.g. http://(IP address):631/printers/lp1) 5. IPP over SSL: A certificate can be added for communication using the IPP protocol. To enable the IPP protocol, turn this item On. To enable this protocol, select On on SSL of the Network Security Settings page. Port Number: Enter the port number. Typically, this should be 443. The status of IPP over SSL Certificate is shown. To make advanced settings, click Settings button and select a certificate. Click Submit button to finalize settings. Configure the device certificate on the Certificates page of Security Settings. This Certificate can be used in common with IPP over SSL and HTTPS. 6. Raw: RAW employs another method of printing over the network like LPR. Typically, RAW uses port 9100 to remotely administer the printer via using SNMP or MIB. To enables the RAW protocol, turn this item On. 7. WSD Print: WSD is a new networking protocol provided with Windows Vista for discovery of the machines and data exchange for printing. To enable the WSD protocol, turn this item On. 8. POP3 (E-mail RX): POP3 is a standard protocol for retrieval of E-mail. POP3 is a standard protocol used by local e-mail clients including the machine to retrieve Email from a remote server over a TCP/IP connection. To enable the POP3 protocol to retrieve E-mail, turn this item On. To configure the POP3 protocol, go to the Email Settings page under Function Settings. To use E-mail printing, activate remote printing on the Printer Settings page under Function Settings. Select a method for POP3 Security (User 1 (to 3)) from STARTTLS, or SSL/TLS, or Off on the drop-down list. To enable this protocol, activate SSL on the Network Security Settings page under Security Settings. Send Protocols 52 Embedded Web Server

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
Network Settings
52
Embedded Web Server
Protocol
This section includes advanced settings for various protocols used as the
communication procedures and communication protocols.
*: If the settings for the item marked with an asterisk (*) has been changed, you must
restart the machine or the network. To restart the machine, proceed to the
Reset
page.
1.
Click
Protocol
under
Network Settings
on the navigation menu. The
Protocol
Settings
page opens.
2.
This section includes the following items for configuration.
Print Protocols
Configure the protocols used for printing. This section includes the following items
for configuration:
1.
NetBEUI
: The NetBEUI protocol allows Peer-to-peer printing (SMB Print). With
this protocol enabled, the machine is created in Windows Network Neighborhood.
NetBEUI is an enhanced version of the NetBIOS protocol, which is used for
transport of SMB protocol.
Enables or disables the NetBEUI protocol. If NetBEUI is turned
On
, the name res-
olution by NetBIOS (NMB) becomes available.
Workgroup
: Workgroup represents the workgroup which will appear in
Entire
Network
in "Windows Network Neighborhood."
Comment
: You can enter comments here. (This can be left blank.)
2.
LPD
: To enables the LDAP protocol, turn this item
On
.
3.
FTP Server (Reception)
: FTP is a communications protocol for transmitting files
over a Network. To enables the FTP protocol, turn this item
On
.
4.
IPP
: IPP is a protocol which performs transmission and reception of printing data
and configuration of machines through TCP/IP networks including the Internet. To
enables the IPP protocol, turn this item
On
.
Port Number
: Enter the port number. Typically, this should be
631
.(e.g. http://(IP
address):631/printers/lp1)
5.
IPP over SSL
: A certificate can be added for communication using the IPP
protocol. To enable the IPP protocol, turn this item
On
. To enable this protocol,
select
On
on
SSL
of the
Network Security Settings
page.
Port Number
: Enter the port number. Typically, this should be
443
. The status of
IPP over SSL Certificate
is shown. To make advanced settings, click
Settings
button and select a certificate. Click
Submit
button to finalize settings.
Configure the device certificate on the
Certificates
page of
Security Settings
.
This Certificate can be used in common with IPP over SSL and HTTPS.
6.
Raw
: RAW employs another method of printing over the network like LPR.
Typically, RAW uses port 9100 to remotely administer the printer via using SNMP
or MIB. To enables the RAW protocol, turn this item
On
.
7.
WSD Print
: WSD is a new networking protocol provided with Windows Vista for
discovery of the machines and data exchange for printing. To enable the WSD
protocol, turn this item
On
.
8.
POP3 (E-mail RX)
: POP3 is a standard protocol for retrieval of E-mail. POP3 is a
standard protocol used by local e-mail clients including the machine to retrieve E-
mail from a remote server over a TCP/IP connection. To enable the POP3 protocol
to retrieve E-mail, turn this item
On
. To configure the POP3 protocol, go to the
E-
mail Settings
page under
Function Settings
. To use E-mail printing, activate
remote printing on the
Printer Settings
page under
Function Settings
.
Select a method for
POP3 Security (User 1
(to
3
)
)
from
STARTTLS
, or
SSL/TLS
,
or
Off
on the drop-down list. To enable this protocol, activate SSL on the
Network
Security Settings
page under
Security Settings
.
Send Protocols