Kyocera TASKalfa Pro 15000c Pro 15000c Command Center RX User Guide - Page 42

E-mail, SMTP protocol

Get Kyocera TASKalfa Pro 15000c PDF manuals and user guides View all Kyocera TASKalfa Pro 15000c manuals
Add to My Manuals
Save this manual to your list of manuals

Page 42 highlights

Function Settings E-mail Switches EcoPrint On or Off to control ink consumption for saving the printing costs. The default setting is Off. When selecting On, you can select Ink Save Level from 1 (Low) to 5 (High) according to the machine. Resolution Select the resolution from the drop-down list. 3. Click Submit button. This section includes advanced settings for E-mail. SMTP protocol 1. Click E-mail under Function Settings on the navigation menu. The E-mail Settings page opens. 2. You can make changes for the following items as required. SMTP Protocol Display whether a SMTP connection is available or not. Configure SMTP in SMTP (E-mail TX) on the Protocols Settings page. SMTP Server Name Enter the SMTP server name or its IP address. If entering the name, rather than the IP address, a DNS server address must also be configured. The DNS server address may be entered on the TCP/IP Settings page. SMTP Port Number Enter the port number that SMTP will use (default is 25). Normally, use port 25, but you can change the port number to suit the email server's application and operation. For example, the default port number for SMTP connections over SSL is 465. The default port number for SMTP authentication is 587. SMTP Server Timeout Sets the timeout in seconds during which this device tries to connect to the SMTP server. Authentication Protocol Enables or disables the SMTP authentication protocol or sets POP before SMTP as the authentication type. When selecting On or POP before SMTP, you can select user on the drop-down list. When selecting Other from Authentication as, you can specify Login User Name and Login Password. POP before SMTP Timeout Sets the timeout in seconds during which this device tries to connect to the POP3 server. You can configure this item when you selected POP before SMTP as Authentication Protocol. Connection Test 38 Embedded Web Server

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
Function Settings
38
Embedded Web Server
Switches EcoPrint
On
or
Off
to control ink consumption for saving the printing costs.
The default setting is Off. When selecting
On
, you can select
Ink Save Level
from
1
(Low)
to 5
(High)
according to the machine.
Resolution
Select
the resolution from the drop-down list.
3.
Click
Submit
button.
E-mail
This section includes advanced settings for E-mail.
SMTP protocol
1.
Click
E-mail
under
Function Settings
on the navigation menu. The
E-mail Setting
s
page opens.
2.
You can make changes for the following items as required.
SMTP Protocol
Display whether a SMTP connection is available or not. Configure SMTP in
SMTP
(E-mail TX)
on the
Protocols Settings
page.
SMTP Server Name
Enter the SMTP server name or its IP address. If entering the name, rather than the
IP address, a DNS server address must also be configured. The DNS server
address may be entered on the
TCP/IP Settings
page.
SMTP Port Number
Enter the port number that SMTP will use (default is 25). Normally, use port 25, but
you can change the port number to suit the email server’s application and operation.
For example, the default port number for SMTP connections over SSL is 465. The
default port number for SMTP authentication is 587.
SMTP Server Timeout
Sets the timeout in seconds during which this device tries to connect to the SMTP
server.
Authentication Protocol
Enables or disables the SMTP authentication protocol or sets
POP before SMTP
as
the authentication type. When selecting
On
or
POP before SMTP
, you can select
user on the drop-down list. When selecting
Other
from
Authentication as
, you can
specify
Login User Name
and
Login Password
.
POP before SMTP Timeout
Sets the timeout in seconds during which this device tries to connect to the POP3
server. You can configure this item when you selected
POP before SMTP
as
Authentication Protocol
.
Connection Test