Kyocera TASKalfa Pro 15000c Pro 15000c Command Center RX User Guide - Page 25

Device Settings Main Unit Decurl Adjustment If a paper curl occurred when finishing from the right tray, select a setting from the drop-down list. DE Unit Decurl Adjustment If a paper curl occurred when finishing from the 4,000-sheet finisher or 5,000-sheet stacker, select a setting from the drop-down list. Ink Discharge Distance Perform this adjustment if ink splashing or color drift occurs on the output result, or paper jams occur. Print Position Settings Print out a test chart using the operation panel, and select a setting of Timing Data Adjustment (Front Side), Timing Data Adjustment (Back Side), Centering Correction (Front Side), Centering Correction (Back Side), and Paper Loop Amount Adjustment from the drop-down list. Note: For how to printing a test chart and measuring method of adjustment value, refer to the machine's Operation Guide. Adjust Motor Speed Settings To feed paper, the speeds of the resistance motors before and after the feeding unit and the speed of the drying belt motor must made to match, using the speed of the main unit feeding belt as a reference. Adjust this setting if there is color drift in only the leading edge or trailing edge of the paper. Note: For how to printing a test chart and measuring method of adjustment value, refer to the machine's Operation Guide. 3. When you load the paper which is registered in Paper Catalog in the cassette, click Settings button. The Paper Catalog screen appears. 4. Select a paper brand from the list. Note: You can refine search the paper brand by selecting Paper Size and Weight respectively. You can also search by entering paper brand in Name. 5. Click Submit button. A paper brand id displayed in Paper Catalog. Note: When you change the paper brand or switch to the custom paper, click Delete button and go to step3. 6. Click Submit button. MP Tray Settings Refer to Cassette setting above for settings and procedures. User Guide 21