Kyocera TASKalfa Pro 15000c Pro 15000c Command Center RX User Guide - Page 40

Function Settings You can select the actions when the paper runs out in the paper source while printing. When selecting Off, the machine displays message to load paper in paper cassette and stops printing. Load the paper according to the paper source displayed to resume printing. You can also select the desired paper source. When selecting On, the machine continues printing automatically if the other paper cassette contains the same paper as the currently-used paper cassette. Printing Job Terminator You can select the condition which regarded as a jon termination if the print job could not be processed until the end due to your environment and the other reason. When selecting EOJ (End of Job), the termination of the job data (R RES;!! EXIT;) is regarded as one job until it is detected. When selecting End of Network Session, the data included in a network session at network connection is regarded as one job. When selecting UEL (Universl Exit Language), the UEL included in the termination of the job data is regarded as one job until it is detected. Remote Printing Permit or prohibit remote printing. 3. Click Submit button. Workflow Settings When you print a job, the print job result is stored in a folder. Configure the settings to connect to the folder using the SMB protocol. 1. Click Printer under Function Settings on the navigation menu. The Printer Settings page opens. 2. Click Settings button. The Workflow Settings page opens. 3. You can make changes for the following items. SMB Display whether an SMB connection is available or not. Set SMB to On on the Protocol Settings page. Print Result Notification Select whether to notify the print result. Host Name Enter the host name. If you use the host name, you must first specify the DNS server information. Port Number Enter the port number from 1 to 65535. Path Enter the path of folder. Login User name 36 Embedded Web Server