Epson SureLab D3000 Administrator Guide - Page 62

Problems with Gray Adjustment

Get Epson SureLab D3000 PDF manuals and user guides View all Epson SureLab D3000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 62 highlights

Settings/Maintenance Problems with Gray Adjustment Symptom The print quality for the adjustment pattern is too low. An error occurred while applying the parameters. Errors in the adjustments have been applied. I want to make adjustments again. The adjustment values have been initialized. Error Messages - "Try again after closing the Settings/Maintenance screen." "Operation failed." - - What to do Is the print head clogged? Print an adjustment pattern again after performing head cleaning. Are the PC and the printer connected to the spectrometer correctly? Check the connection between the PC and the printer, and then click Apply again. Is there enough free space on the PC's hard disk? Make sure there is sufficient free space on the PC's hard disk, and then click Apply again. Initialize and then readjust. Press Clear for the Color Balance, Density Adjustment, and Gradation Correction to initialize the settings, and then make adjustments again. Have adjustment values been initialized after performing color calibration? Perform gray adjustment again. 62

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
Settings/Maintenance
62
Problems with Gray Adjustment
Symptom
Error Messages
What to do
The print quality for the
adjustment pattern is too
low.
-
Is the print head clogged?
Print an adjustment pattern again after performing head
cleaning.
An error occurred while
applying the parameters.
"Try again after closing the
Settings/Maintenance
screen."
"Operation failed."
Are the PC and the printer connected to the spectrometer
correctly?
Check the connection between the PC and the printer, and then
click Apply again.
Is there enough free space on the PC's hard disk?
Make sure there is sufficient free space on the PC's hard disk, and
then click Apply again.
Errors in the adjustments
have been applied. I want
to make adjustments
again.
-
Initialize and then readjust.
Press Clear for the Color Balance, Density Adjustment, and
Gradation Correction to initialize the settings, and then make
adjustments again.
The adjustment values
have been initialized.
-
Have adjustment values been initialized after performing
color calibration?
Perform gray adjustment again.