Epson SureLab D3000 Administrator Guide - Page 29
Auto Cleaning, From the CR Unit Adjustment/Maintenance 03 menu, click
View all Epson SureLab D3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Settings/Maintenance Auto Cleaning From the CR Unit Adjustment/Maintenance (03) menu, click Auto Cleaning (0311) from Head Cleaning (031) to display the screen. A Click Auto Cleaning. Nozzle check begins, and cleaning is performed as necessary. This may take some time depending on the status of the nozzles. B Check the status of each head displayed in the Result. When the nozzles are cleared, "Good" is displayed. If nozzles are clogged, a message is displayed that indicates you need to clean the Print Head Unit again. Perform necessary cleaning. Reading the Results: Color Green Yellow Red White Explanation The nozzles are not clogged. Clogging is detected. Perform Auto Cleaning (0311) again. Clogging is detected. Perform Detect Clogging from Nozzle Check (0312), and then perform Powerful cleaning again for heads indicated by red. Auto Cleaning is still in progress. 29