Epson SureLab D3000 Administrator Guide - Page 44
Measure Color, Write, from Correction Value Verification
View all Epson SureLab D3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Settings/Maintenance E Click Measure Color from Correction Value Verification Phase. G Click Write from Correction Value Verification Phase. The screen where you can enter the name of the correction value is displayed. F Perform color measurement in the color measurement device in the same way as color measurement for the correction chart. U "Correction chart color measurement (for the "i1Pro")" on page 40 U "Correction chart color measurement (for the "i1iSis")" on page 42 H Enter the name of the correction value, and then click OK. You cannot use the same name for more than one correction value. If the same name already exists, enter another name of the correction value. Verify correction accuracy. If the verification results are "OK", write the created correction value file to the Printer PC. Subsequent prints are corrected using the written correction value. If the results are "NG", you need to create the correction value again. Perform operations from Print in the correction value creation phase. 44