Epson SureLab D3000 Administrator Guide - Page 28
Notes, When the Result of Auto Cleaning 0311 are Good, but nozzles still appear to be clogged
View all Epson SureLab D3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Settings/Maintenance 1 There are streaks in the prints or other problems such as a difference in color 2 Perform Auto Cleaning (0311). When all of the Result icons on the screen are "green" When a Result icon on the screen is "yellow" When a Result icon on the screen is "red" -> Operations are complete. If the problems in the prints are not resolved, perform clogging detection and head cleaning as described in the Notes section. -> Perform Auto Cleaning (0311) again. Go to the next step. Go to the next step if the Result are not "Good" after repeating the procedure three times. 3 Perform Detect Clogging from Nozzle Check (0312), and then click Powerful for any of the heads that have "red" (or "yellow") icons. After cleaning, perform Detect Clogging. If the Result on the screen are "Good", and If the Result on the screen are "Good", but there are no problems in the prints there are still problems in the prints -> Operations are complete. -> Contact Service Support. Notes: When the Result of Auto Cleaning (0311) are "Good", but nozzles still appear to be clogged Auto Cleaning (0311) and Detect Clogging search for clogged nozzles using an electronic sensor. Therefore, it is possible that clogged nozzles were not detected by the sensor. If there is any doubt, perform Print Check Pattern from Nozzle Check (0312), visually check for clogged nozzles, and then perform cleaning as necessary. 28