Dell DSS 2500 Owners Manual - Page 55
Installing the system cover
View all Dell DSS 2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that are shipped with your product. 1. Follow the safety guidelines listed in the Safety instructions section. 2. Turn off the system, including any attached peripherals. 3. Disconnect the system from the electrical outlet and peripherals. Steps 1. Loosen the screw that secures the system cover to the chassis. 2. Hold the cover on both sides, and lift the cover away from the system. Figure 9. Removing the system cover a. system cover b. retention screw Related references Safety instructions on page 53 Related tasks Installing the system cover on page 55 Installing the system cover Prerequisites CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that are shipped with your product. Follow the safety guidelines listed in the Safety instructions section. Steps 1. Align the slots of the system cover with the tabs on the chassis and slide the cover forward. 2. Tighten the screw securing the system cover to the chassis. Installing and removing system components 55