Dell DSS 2500 Owners Manual - Page 121
Installing the power interposer board
View all Dell DSS 2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
Figure 64. Installing the power interposer board 1. FAN1 power connector 3. hook (4) 5. power interposer board 2. release latch 4. locking slot (4) Next steps 1. If applicable, install the PCIe expansion card riser. 2. If applicable, connect the required power or data cables to the expansion card(s). 3. Install the internal hard drive cage. 4. Install the internal hard drive carrier. 5. Reinstall the cooling shroud. 6. If applicable, open the expansion card latch on the cooling shroud to secure the full length expansion card. 7. Follow the procedure listed in the After working inside your system section. Related references Safety instructions on page 53 Related tasks Before working inside your system on page 53 Removing the cooling shroud on page 59 Removing the (optional) 2.5 inch internal hard drive carrier on page 76 Removing the (optional) 2.5 inch internal hard drive cage on page 81 Removing the power interposer board on page 119 Removing the dual riser module (optional) on page 92 Removing the internal PERC riser on page 94 Installing the internal PERC riser on page 95 Installing the dual riser module (optional) on page 93 Installing the (optional) 2.5 inch internal hard drive cage on page 83 Installing the (optional) 2.5 inch internal hard drive carrier on page 78 Installing the cooling shroud on page 60 After working inside your system on page 54 Installing and removing system components 121