Adaptec 2930U User Guide - Page 57
Starting SCSI, Using SCSI, Settings
UPC - 760884155530
View all Adaptec 2930U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Configuring the SCSI Card 2930CU with SCSISelect SCSISelect Options Available Settings BIOS Support for Bootable CD-ROMs2 Enabled, Disabled BIOS Support for Int 13 Extensions2 Enabled, Disabled 1 Setting is valid only if Multiple LUN Support is enabled. 2 Settings are valid only if host adapter BIOS is enabled. Default Setting Disabled Enabled Starting SCSISelect To start SCSISelect: 1 Turn on or restart your computer. 2 When this message appears on your screen, immediately press Ctrl+A. (This message appears for only a few seconds.) Press Ctrl+A for SCSISelect (TM) Utility! 3 From the menu that appears, use the ↑ and ↓ keys to move the cursor to the option you want to select, then press Enter. Note: If you have difficulty viewing the display, press F5 to toggle between color and monochrome modes. (This feature may not work on all monitors.) Using SCSISelect Settings To select an option, use the ↑ and ↓ keys to move the cursor to the option, then press Enter. In some cases, selecting an option displays another menu. You can return to the previous menu at any time by pressing Esc. To restore the original SCSISelect default values, press F6 from the main SCSISelect screen. SCSI Bus Interface Options I Host Adapter SCSI ID-Sets the SCSI ID for the SCSI card. The SCSI Card 2930CU is set at 7, which gives it the highest priority on the SCSI bus. You should not change this setting. B-3