Adaptec 2930U User Guide - Page 19
Connect the other end of the cable to the internal SCSI device. - kit
UPC - 760884155530
View all Adaptec 2930U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Installing SCSI Devices 4 Connect one end of the 50-pin internal SCSI cable to the SCSI connector on the card, as shown in the next figure. Ensure that the connector fits snugly. Make sure Pin 1 on the cable aligns with Pin 1 on the internal SCSI device connector. Pin 1 is usually designated by a "1" or small triangle. Blue or red stripe denotes Pin 1 Key Pin 1 marking Internal SCSI connector Standard 50-pin internal SCSI cable (included in kit) 5 Connect the other end of the cable to the internal SCSI device. Terminated internal SCSI device Internal SCSI cable 6 If you are installing one internal SCSI device only, you must terminate this device, then skip to Step 9 on page 3-4. Refer to your SCSI device's documentation for termination instructions. 3-3