Adaptec 2930U User Guide - Page 25

Installing Drivers Windows Me Windows Me has embedded driver support for a SCSI card as part of the installation software. When the SCSI Card 2930CU is installed and you have restarted your computer, the Add New Hardware Wizard window appears to guide you through the final steps. 1 When the Add New Hardware Wizard window appears, select the top radio button to launch an automatic search for the most suitable driver, and click Next. Windows locates the appropriate driver for the newly-detected SCSI card and automatically processes the installation. The SCSI Card 2930CU is detected as PCI SCSI AHA-2930CU. Note: If Windows is unable to find the driver, insert the SCSI Card 2930 CD into the CD-ROM drive and direct Windows to search the CD for the driver. 2 Click Finish to complete the installation. To verify driver installation, see Verifying Driver Installation - Windows 95/98/Me on page 4-11. Windows 95 and Windows 98 This section explains how to install the driver for Windows 95/98. The driver is detected as PCI SCSI AHA-2930CU. The driver file on the SCSI Card 2930 CD is aic78xx.mpd. If you are performing a first-time Windows 95/98 installation, see the next section, Installing the Driver When Installing Windows 95/98. If Windows 95/98 is already installed on your system, see Installing the Driver When Windows 95 is Already Installed on page 4-4 or Installing the Driver When Windows 98 is Already Installed on page 4-7. Note: When Windows 95/98 starts, if a New Hardware Found dialog box displays after your SCSI Card 2930CU has been installed, select Driver from Disk Provided by Hardware Manufacturer. Insert the SCSI Card 2930 CD into the CD-ROM drive and type the drive letter for your CD-ROM drive. Then, follow the on-screen instructions. 4-3