Adaptec 2930U User Guide - Page 48
the adapter in the PCI slot, or try installing it
UPC - 760884155530
View all Adaptec 2930U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Troubleshooting Error Code [xxxxx022] [xxxxx023] [xxxxx024] [xxxxx031] [xxxxx032] [xxxxx050] [xxxxxx9A] [xxxxx081] [xxxxxx8A] [xxxxxx83] [xxxxx089] Description Adapter or target device protocol error. The adapter or target device has broken the communication protocol. A faulty device could cause this message to appear. Normally this is not a serious problem. If you get this message frequently over a short period of time, it could indicate that the device or system is malfunctioning. Unplug or power down unused devices to see if the problem persists. Target device parity error. The driver has detected a parity error by the target device. Data overrun or underrun. The adapter was given more or less data than the expected amount of data. Target device queue full. The target device internal buffer is full. Target device busy. The target device reports a Busy status. Another program may already be using this device. Host adapter failure. Your host adapter may not be properly installed or is defective. Try reseating the adapter in the PCI slot, or try installing it a different PCI slot. Adapter initialization failure. An error has occurred while the driver was setting up its internal data structures. Verify that your adapter is supported by this version of the driver. Unable to allocate memory. This indicates that there may be a problem with the amount of memory installed in your system. Verify that your system has at least the minimum amount of memory required by your operating system. 5-12