2010 Polaris Vegas 8-Ball Owners Manual - Page 99

Fuel System Maintenance Fuel Line Fitting Release Buttons Fuel Tank Removal/Installation 4. With the engine and exhaust cool, wrap a clean shop towel around the fuel line fitting at the fuel rail. Disconnect it from the fuel rail by squeezing both release buttons simultaneously. Gently slide the fitting from the fuel rail. NOTICE: Fuel can damage painted surfaces and plastic parts. Wipe up spilled fuel immediately using a clean, dry, soft cloth. 5. Lift the fuel tank and unplug the fuel pump wire harness at the rear of the tank. At the rear left side of the tank, disconnect the tank vent hose (California models) and the water drain hose. 6. Carefully remove the fuel tank. Be prepared to catch dripping fuel in an appropriate container. 7. To reinstall the fuel tank, reverse the removal steps, routing the fuel supply hose to the right of the breather hose. 8. Reinstall the fuel line fitting to the fuel rail by sliding the quick-connect onto the rail connector until you hear it click. 9. Reinstall the fuel tank mounting screws. Torque: 35 ft-lb. (47.5 Nm) 10. Reinstall the fuel line access cover. Reinstall the seat. 97