2010 Polaris Hammer Owners Manual - Page 124

Maintenance Sidestand Lubrication 1. Secure the motorcycle in a fully upright position using an appropriate motorcycle lift or a block of wood or steel placed securely under the frame. 2. Move the sidestand upward to its stored position. CAUTION! Wear face protection. The sidestand return spring is under tension and can injure your eyes and face when released. 3. Hold the nut and remove the sidestand pivot bolt and sidestand return spring. Wipe any old grease and dirt from the sidestand, frame and pivot bolt. 4. Lubricate the sidestand, the pivot bolt and the ends of the spring with VICTORY All Purpose Grease or equivalent. 5. Reinstall the sidestand spring and place the sidestand on the mounting boss with the stand in the stored (up) position. Install the pivot bolt and tighten it while holding the nut. Torque: 35 ft-lbs (47 Nm) 6. Verify that the sidestand moves freely through its pivot range. 122