2010 Polaris Hammer Owners Manual - Page 105
2010 Polaris Hammer Manual
Page 105 highlights
Brake Systems Maintenance Front Brake Fluid Check the front brake fluid level. See page 49. The fluid level should be at or above the top of the sight glass. Add fluid as needed. Replace cloudy or contaminated fluid. Use DOT4 brake fluid in the brake fluid reservoir. Use fluid only from a sealed, clean container. Do not operate the brake while the reservoir cover is removed. Fluid could overflow from the reservoir and cause air to enter the fluid system. WARNING! Using the wrong fluid or allowing air or contaminants into the fluid system can damage the system seals or result in a malfunction that could lead to serious injury or death. 1. Straddle the motorcycle and bring it to the fully upright position. Position the handlebars so that the fluid reservoir is level. 2. Wipe the fluid container and the area around the reservoir cover with a clean cloth. NOTICE: Brake fluid will damage painted surfaces and plastic parts. Always clean spilled brake fluid immediately with water and a mild detergent. 3. Remove the reservoir cover and gasket. 4. Carefully add fluid to the recommended level. 5. Reinstall the reservoir gasket and cover. 103