Panasonic WU-192ME2U9 Technical Data Manual - Page 94
Setting, CZ-RWSU3U, Main/Sub setting, Address setting
![]() |
View all Panasonic WU-192ME2U9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
52. Wireless Remote Controller CoCntoronltroof l2oWfAVYRVFRSFYSSYTSETMEMS 2-18. Setting Main/Sub setting Address setting Remove the top case of the receiver for setting. Switch Main/Sub setting Use this to set Main/Sub for the remote controller and the receiver. Set one to [Main] and the other to [Sub]. Factory default: [Main] It is recommended to set the wired remote controller to [Main]. Main/Sub MAIN SUB Main/Sub switch position 1 Address setting When more than 1 receiver is installed in the same room, setting addresses prevents interference. 2 For how to change addresses of wireless remote controllers, see operating instructions of wireless remote controllers. Wireless Address Address Address Address Address Address Address remote controller address display ALL 1 2 3 4 5 6 3 Address switch position Receiving is possible at all address positions. 4 CZ-RWSU3U Before installing the receiver, see the sections on "Wiring for the 5 Receiver" and "Setting Address Switches". Then check the settings Screw Clamper of the [S003] DIP switch on the receiver's PCB. PCB cover 6 * Remove the coverfrom the Receiver PCB receiver when performing the Corner PCB settings. cover 7 All set at OFF when shipped from the factory. ON Main/Sub selector switch for remote controllers (4) OFF: Main ON: Sub Set its address (1) to (3) 8 8 9 3 - 22
![](/manual_guide/products/panasonic-u72me2u9-technical-data-manual-ec761eb/94.png)