Panasonic WU-192ME2U9 Technical Data Manual - Page 168

5. Simplified Remote Controller (CZ-RE2C2) Control of 2WAY VRF SYSTEM Display Section 1. / / / (Fan mode select) indication The selected fan mode is displayed. 2. (Flap position) indication Indicates the flap position. 3. (Swing) indication Appears while the flap swings. 4. (Outing) indication ( Outing Function) Appears when the outing function is set. 1 5. Operation Mode indication Displays the selected operation mode. (AUTO /HEAT /DRY /COOL / FAN ). 10. (Centralized control) indication Appears when operated in centralized control. If the remote control operation is not permitted to the remote unit, when the (Start/Stop) button, (Mode select) button, (Fan speed) button, (Swing/Air direction) button or Temperature setting) buttons are pressed, flashes and rejects the change. 11. (Disabled feature) indication Displayed if the selected feature was disabled during installation. 12. (Heating standby mode) indication appears when the fan of the indoor unit is stopped or in low fan speed. 6. Upper and lower limit indication of the outing function 2 : Indicates the upper limit of the temperature 13. (Caution) indication Appears when the protective device is activated or when an abnormality occurs. : Indicates the lower limit of the 14. Alarm indication temperature This displays alarm messages when an error 7. Temperature indication occurs. Indicates the set temperature. 3 8. °F / °C (Temperature unit) indication 15. (Oil) indication Appears when the engine oil needs to be changed. (Appears when the gas heat pump 9. (Remote control sensor) indication air conditioner is used.) Appears when the remote control sensor is used. 4 5 6 7 8 8 9 3 - 96