Panasonic WU-192ME2U9 Technical Data Manual - Page 128
Password change, Temp sensor, Main/sub, Vent output, Contact address, Select [Initial settings].
![]() |
View all Panasonic WU-192ME2U9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 128 highlights
1 2 3 4 5 6 7 8 8 9 3. High-spec Wired Remote Controller (CZ-RTC5A) Initial Settings Password change Temp sensor Main/sub Vent output Contact address 1 Display the menu screen. To return to the previous screen Press . To return to the top screen Press 2 times. 2 Select [Initial settings 3 Select the item to set 4 Enter the password as necessary Repeat) • Select the number with ▲▼ and move to the next field with ►. Password change 5 Enter a new password Repeat) 6 Enter the password again to confirm. → (Press 2 times to finish.) *To display each item, see steps 1 to 4 on the previous page. Temp sensor • Select the temperature sensor to control the room temperature. Main/sub • When 2 remote controllers are connected to the same indoor unit, this registers one remote controller as [Main] and the other as [Sub]. (There is no difference in function between Main and Sub, however, when the remote controller sensor is selected for the temperature sensor setting, the [Main] sensor controls the operation.) Vent output • [Set]: When the air conditioner is turned ON/OFF, the connected ventilation fan is turned ON/OFF, too. • To interlock the air conditioner and the fan, another installation work is required. Contact address • If you need to contact for servicing, check the back cover of the operating instructions for indoor units or outdoor units. Remote Indoor unit controller Temp sensor 3 - 56 Control of 2WAY VRF SYSTEM 42 (EN) $;35$"औઆ@&OQEG $;35$"औઆ@&OQEG 43 (EN)
![](/manual_guide/products/panasonic-u72me2u9-technical-data-manual-ec761eb/128.png)