Panasonic WU-192ME2U9 Technical Data Manual - Page 178

1 2 3 4 5 6 7 8 8 9 6. System Controller (CZ-64ESMC2U) Air-conditioning Control System (continued)  Number of connectable indoor units • Indoor unit: Max. 64 units • Number of settings: 4 zones, 64 groups • 1 zone: 16 groups, 64 units  Control mode This unit is equipped with 2 "Operation modes" and 5 "Number-of-controlled-units modes" * Each mode is set at the time of installation. For details, refer to the Installation instructions.  Operation mode • "Central control mode": Uses this unit as the "Central controller" Note When the Central control mode is set, the "Prohibit R/C mode" can be used. • "Remote control mode": Uses this unit as the "Remote control". Note When the Remote control mode is set, the "Prohibit R/C mode" cannot be used. Also, if other central controllers sets "Prohibit R/C", this unit cannot operate indoor units.  Number-of-controlled-units mode • All mode Controls on All, Zone or Group basis. • "Zone 1, Zone 2, Zone 3 and Zone 4 modes" Operates and sets only the indoor units in any of the Zone 1, Zone 2, Zone 3 and Zone 4. Operation mode Central control mode Remote control mode All mode All central control All remote control Number-ofcontrolled-units mode Zone 1 mode Zone 2 mode Zone 3 mode Zone 1 central control Zone 2 central control Zone 3 central control Zone 1 remote control Zone 2 remote control Zone 3 remote control Zone 4 mode Zone 4 central control Zone 4 remote control Part Names Control panel Return button Returns to the previous screen. LCD screen Energy saving button Switches Energy saving/ Normal operation. Timer button Performs the timer reservation. Cross key buttons Selects an item. Up Left Enter button Fixes the selected content. Right Down Note Menu button Displays the menu screen (P.10). Select button Switches the screen. • Switches the operation/ setting target among [All], [Zone] and [Group]. • Switches the basic operation screen among [Oper] (Operation), [ ] (Prohibit R/C) and [Vent/Misc] (Ventilation/Other). START button Starts operation. STOP button Stops operation. Operation indicator (Green) Illuminates during operation. Blinks during alarm. * If at least one unit is operating or alarming, the indicator illuminates or blinks. 3 - 106 Control of 2WAY VRF SYSTEM 8 QEG


 $;&4.$6@4ZTUFN@$POUSPMMFS@&OJOEE


 Press centre No glove No pen  If a password has been set, the password entry screen is displayed after any of the following operations. • After operating [1. Energy saving] in the menu • After operating the Menu button and Timer button • After operating all buttons For password, see Password Setting. (P.44) 9 QEG


 $;&4.$6@4ZTUFN@$POUSPMMFS@&OJOEE