Panasonic WU-192ME2U9 Technical Data Manual - Page 110

1 2 3 4 5 6 7 8 8 9 3. High-spec Wired Remote Controller (CZ-RTC5A) Part Names Screen display Top screen Appears when ECONAVI is being set to ON. (When the ECONAVI panel is attached) Operation is locked. (P.39) Remote controller name (P.40) Present time & day (P.39) Setting information icon (Next page) Operation mode The indoor unit is stopped or slight blow operation is in process. Fan speed Set temperature Flap When inspection is required (P.52) Appears if there is a problem on ECONAVI. * Only the partial settings can be checked on the top screen. To check all the settings (P.50)  Item selection screen  Operation stop screen  Setting information icon (Setting information icons displayed on the top screen) Icon Description The indoor unit filter needs to be cleaned. The engine oil needs to be replaced. (Only when using a gas heat pump air conditioner.) Switching operation modes is prohibited. (Switching to Auto mode is also prohibited.) Remote control operation is restricted by a central control device. [ON/OFF timer] is set. [Weekly timer] is set. Energy saving operation is in process. Fresh air is used for ventilation. (Only when connecting a heat exchange ventilation unit or connecting a commercially sold fan.) Prevents the room temperature from increasing too much (or decreasing too much) when no one is in the room. [Circulation] is set. (Not displayed when all the above icons are displayed.) Page P.20 - P.14 P.15 P.8 P.49 P.37 P.29 Menu screen (P.10) Screen name Present time & day 3 - 38 Control of 2WAY VRF SYSTEM Cursor Operation guide (P.7)  Lock screen display [Operation lock] is functioning. (P.39)  To cancel lock Press button for 4 seconds. 6 (EN) $;35$"औઆ@&OQEG


 $;35$"औઆ@&OQEG


 Operation guide The currently operable content is simply displayed Cross key buttons • : Enter button 7 (EN)