Netgear XCM89UP Web Management User Guide - Page 458

M6100 Web Management User Guide 1. VLAN ID - Select the DAI Capable VLANs for which information has to be displayed or configured. 2. Select from the Admin Mode menu to indicate whether the Dynamic ARP Inspection is enabled on this VLAN. If this object is set to Enable, then Dynamic ARP Inspection is enabled. If this object is set to Disable, then Dynamic ARP Inspection is disabled. The default is Disable. 3. Use Invalid Packets to indicate whether the Dynamic ARP Inspection logging is enabled on this VLAN. If this object is set to Enable, it will log the Invalid ARP Packets information. If this object is set to Disable, Dynamic ARP Inspection logging is disabled. The default is Enable. 4. Use ARP ACL Name to specify a name for the ARP Access list. A VLAN can be configured to use this ARP ACL containing rules as the filter for ARP packet validation. The name can contain up to alphanumeric characters. The ARP ACL Name is deleted if you specify N/A. 5. Use Static Flag to determine whether the ARP packet needs validation using the DHCP Snooping database in case ARP ACL rules do not match. If the flag is enabled then the ARP Packet will be validated by the ARP ACL Rules only. If the flag is disabled then the ARP Packet needs further validation by using the DHCP Snooping entries. The factory default is Disable. 6. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the latest value of the switch. 7. Click Apply to send the updated configuration to the switch. Configuration changes take effect immediately. DAI Interface Configuration To display the DAI Interface Configuration page, click Security  Control> Dynamic ARP Inspection  DAI Interface Configuration. Managing Device Security 458