Netgear XCM89UP Web Management User Guide - Page 426

M6100 Web Management User Guide Table 157. Access Profile Configuration Profile Summary Field Rule Type Service Type Source IP Address Mask Priority Description The action performed when the rules are matched. The service type chosen. The policy is restricted by the service type chosen. Source IP address of the client originating the management traffic. The subnet mask of the IP Address. The priority of the rule. Access Rule Configuration To display the Access Rule Configuration page, click Security  Access > Access Control > Access Rule Configuration. The following page is displayed.  Configure the Access Rule Configuration settings. 1. From the Rule Type list, select to either Permit or Deny access when the rules selected are matched. 2. The policy is restricted by the Service Type you select from the list. Possible management methods are: • HTTP • JAVA • Secure HTTP (SSL) • Secure Telnet (SSH) • SNMP • Telnet • TFTP 3. Enter the Source IP Address of the client originating the management traffic. 4. Enter the Source IP Address Mask of the client originating the management traffic. 5. Configure the Priority to the rule. The rules are validated against the incoming management request in ascending order of their priorities. If a rule matches, the action is performed and Managing Device Security 426