Netgear XCM89UP Web Management User Guide - Page 181

M6100 Web Management User Guide 1. Use Querier Admin Mode to select the administrative mode for MLD Snooping for the switch. The default is disable. 2. Use Querier Address to specify the Snooping Querier Address to be used as source address in periodic MLD queries. This address is used when no address is configured on the VLAN on which query is being sent. The supported IPv6 formats are x:x:x:x:x:x:x:x and x::x. 3. Use MLD Version to specify the MLD protocol version used in periodic MLD queries. MLD queries. 4. Use Query Interval(secs) to specify the time interval in seconds between periodic queries sent by the Snooping Querier. The Query Interval must be a value in the range of 1 and 1800. The default value is 60. 5. Use Querier Expiry Interval(secs) to specify the time interval in seconds after which the last Querier information is removed. The Querier Expiry Interval must be a value in the range of 60 and 300. The default value is 60. Field VLAN IDs Enabled For MLD Snooping Querier Description Displays VLAN IDs enabled for MLD Snooping Querier. MLD Snooping Querier VLAN Configuration To access the MLD Snooping Querier VLAN Configuration page, click Switching Multicast  MLD Snooping  Querier VLAN Configuration. 1. VLAN ID - Specifies the VLAN ID on which MLD Snooping Querier is administratively enabled and VLAN exists in the VLAN database. Configuring Switching Information 181