Netgear XCM89UP Web Management User Guide - Page 450
Specify the Multicast Storm Recovery Level as
View all Netgear XCM89UP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 450 highlights
M6100 Web Management User Guide Field Broadcast Storm Recovery Mode Broadcast Storm Recovery Level Type Broadcast Storm Recovery Level Broadcast Storm Control Action Multicast Storm Recovery Mode Multicast Storm Recovery Level Type Multicast Storm Recovery Level Unicast Storm Recovery Mode Unicast Storm Recovery Level Type Unicast Storm Recovery Level Description Enable or disable this option by selecting the corresponding line on the drop-down entry field. When you specify Enable for Broadcast Storm Recovery and the broadcast traffic on the specified Ethernet port exceeds the configured threshold, the switch blocks (discards) the broadcast traffic. The factory default is enable. Specify the Broadcast Storm Recovery Level as a percentage of link speed or as packets per second. Specify the threshold at which storm control activates. The factory default is 5 percent of port speed for pps type. Provides configurability to shut down the port when the configured threshold of the broadcast storm recovery feature gets breached. Select the option to either ShutDown or RateLimit mode. The default is RateLimit. Enable or disable this option by selecting the corresponding line on the drop-down entry field. When you specify Enable for Multicast Storm Recovery and the multicast traffic on the specified Ethernet port exceeds the configured threshold, the switch blocks (discards) the multicast traffic. The factory default is disabled. Specify the Multicast Storm Recovery Level as a percentage of link speed or as packets per second. Specify the threshold at which storm control activates. The factory default is 5 percent of port speed for pps type. Enable or disable this option by selecting the corresponding line on the drop-down entry field. When you specify Enable for Unicast Storm Recovery and the unicast traffic on the specified Ethernet port exceeds the configured threshold, the switch blocks (discards) the unicast traffic. The factory default is disabled. Specify the Unicast Storm Recovery Level as a percentage of link speed or as packets per second. Specify the threshold at which storm control activates. The factory default is 5 percent of port speed for pps type. Managing Device Security 450