Netgear XCM89UP Web Management User Guide - Page 173
Multicast Router VLAN Configuration, Interface, Multicast Router, Apply, Cancel, Switching, Multicast
View all Netgear XCM89UP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 173 highlights
M6100 Web Management User Guide 1. Use Interface to select the physical interface for which you want Multicast Router to be enabled. 2. Use Multicast Router to enable or disable Multicast Router on the selected interfaces. 3. Click Apply to send the updated configuration to the switch. Configuration changes take effect immediately. 4. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the latest value of the switch. Multicast Router VLAN Configuration This page configures the interface to only forward the snooped IGMP packets that come from VLAN ID () to the multicast router attached to this interface. The configuration is not needed most of the time since the switch will automatically detect the presence of a multicast router and forward IGMP packets accordingly. It is only needed when you want to make sure that the multicast router always receives IGMP packets from the switch in a complex network. To access the Multicast Router VLAN Configuration page, click Switching Multicast IGMP Snooping Multicast Router VLAN Configuration. Configuring Switching Information 173