Netgear XCM89UP Web Management User Guide - Page 457
Dynamic ARP Inspection, DAI Configuration
View all Netgear XCM89UP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 457 highlights
M6100 Web Management User Guide Dynamic ARP Inspection The Dynamic ARP Inspection (DAI) link contains links to the following pages: • DAI Configuration on page 457 • DAI VLAN Configuration on page 457 • DAI Interface Configuration on page 458 • DAI ACL Configuration on page 459 • DAI ACL Rule Configuration on page 460 • DAI Statistics on page 460 DAI Configuration To display the DAI Configuration page, click Security Control> Dynamic ARP Inspection DAI Configuration. 1. Use Validate Source MAC to choose the DAI Source MAC Validation Mode for the switch by selecting Enable or Disable radio button. If you select Enable, Sender MAC validation for the ARP packets will be enabled. The factory default is disable. 2. Use Validate Destination MAC to choose the DAI Destination MAC Validation Mode for the switch by selecting Enable or Disable radio button. If you select Enable, Destination MAC validation for the ARP Response packets will be enabled. The factory default is disable. 3. Use Validate IP to choose the DAI IP Validation Mode for the switch by selecting Enable or Disable radio button. If you select Enable, IP Address validation for the ARP packets will be enabled. The factory default is disable. DAI VLAN Configuration To display the DAI VLAN Configuration page, click Security Control> Dynamic ARP Inspection DAI VLAN Configuration. Managing Device Security 457