Netgear XCM89UP Web Management User Guide - Page 104

M6100 Web Management User Guide Table 55. SNMP Supported MIBs Field Name Description Description The RFC number if applicable and the name of the MIB. The RFC title or MIB description. SNMP V3 This page provides the configuration information for SNMP v3. From the SNMP V3 link, you can access the following pages: • User Configuration on page 104 User Configuration To access this page, click System  SNMP  SNMP V3  User Configuration. A screen similar to the following is displayed. To configure SNMPv3 settings for the user account: 1. Use User Name to specify the user account to be configured. 2. SNMP v3 Access Mode - Indicates the SNMPv3 access privileges for the user account. The admin account always has 'Read/Write' access, and all other accounts have 'Read Only' access. 3. Use Authentication Protocol to specify the SNMPv3 Authentication Protocol setting for the selected user account. The valid Authentication Protocols are None, MD5 or SHA: • If you select None, the user will be unable to access the SNMP data from an SNMP browser. • If you select MD5 or SHA, the user login password will be used as the SNMPv3 authentication password, and you must therefore specify a password, and it must be eight characters long. Configuring System Information 104